SimTech TJG
- Minimum disturbance
- Perfect seed germination
- Excellent residue handling
The inverted T-Slot technique ensures unmatched results
across all surfaces, soil types and climates. Leading discs pre-slice an
opening in front of, and in line with, the tine coulter which places the seed.
The disc cuts through trash and slices through any root structure under the
soil surface preventing residue from blocking the drill and enabling unwanted
material to be cleared out of the seed slot by the coulter.
The creation of a disc slot ahead of the tine also helps
minimise soil surface disturbance by the following coulter, preventing weed
germination and giving the new seed the best possible start. The tine and
patented Z-Tip coulter are centred behind the opening disc so that the front
edge of the coulter simply opens up the slot already created by the disc.
Features:
- Discs, disc bar and suspension - 380mm boron steel opening discs are mounted in pairs on a sprung axle for stone protection. The disc bar has a central adjuster to allow the disc depth to be adjusted according to conditions. The leading disc cuts through trash and crop residue as well as creating a slot to reduce soil disturbance from the tine coulter.
- Tine and point - All SimTech drills use a simple S tine which provides four way stone protection and vibrates in work helping to create a fine tilth. Drills which are to be used for predominately grassland work or in low crop residue situation are commonly specified with three rows of 25mm tines at 150mm centres. For arable work and use in heavy trash conditions three rows of 30mm tines are used at a spacing of 187.5mm.
- Frame - High gloss powder coated with edge primer to improve resistance to seed dressing and fertiliser. Loading step platform and lighting kit as standard.
- Chain covering harrow - Simple and yet very effective. The heavy chain covering harrow may look like a crude solution but is extremely effective at filling and closing the seed slot, albeit not too tightly so that the germinating seed can emerge.
- Depth wheel and adjuster - Simple depth wheel with an adjuster handle are used to set the working depth of the drill along with the top link to ensure the machine is level.
- 2.4m - 3m working width
- Electronic or ISOBUS control system
- 400L or 1000L pressurised hopper with sealed lid
- Interchangeable feed blocks for different metering options